Home inspections are important to have done on every home being bought or
sold.
Safety Guidelines for Home Pools
Swimming pools should always be happy places.Unfortunately, each year thousands
of American
families confront swimming pool tragedies,
drowning's and near-drowning's of young children.
These tragedies are preventable. These are guidelines for pool barriers that can
help prevent
most submersion incidents involving young children.
This designed for use by owners,
purchasers, and builders of residential pools, spas,
and hot tubs.
These
guidelines are not intended as the sole method to minimize pool
drowning of young children, just helpful safety tips for safer pools.
Each year, hundreds of young children
die and thousands come close
to death due to submersion in residential
swimming pools. CPSC has estimated
that each year about 300 children
under 5 years old drown in swimming
pools. Hospital
emergency room treatment is required for
more than 2,000 children under 5 years of
age who were submerged in residential
pools.
CPSC did an extensive study of
swimming pool accidents, both fatal
drowning's and near-fatal submersions, in
California, Arizona and Florida, states in
which home swimming pools are very
popular and in use during much of the
year.
- In California, Arizona and Florida, drowning was the leading cause of accidental death in and around the home for children under the age of 5 years.
- 75 percent of the children involved in
swimming pool submersion or drowning
accidents were between 1 and 3 years old.
- Boys between 1 and 3 years old were
the most likely victims of fatal drowning's
and near-fatal submersions in residential
swimming pools.
- Most of the victims were being supervised
by one or both parents when the
swimming pool accident occurred.
- Nearly half of the child victims were
last seen in the house before the pool
accident occurred. In addition, 23 percent
of the accident victims were last seen on
the porch or patio, or in the yard.
- This means that fully 69 percent of the
children who became victims in swimming
pool accidents were not expected to
be in or at the pool, but were found
drowned or submerged in the water.
- 65 percent of the accidents occurred in
a pool owned by the victim’s immediate
family, and 33 percent of the accidents
occurred in pools owned by relatives or
friends.
- Fewer than 2 percent of the pool accidents
were a result of children trespassing
on property where they didn’t live or
belong.
- 77 percent of the swimming pool accident
victims had been missing for five
minutes or less when they were found in
the pool drowned or submerged.
The speed with which swimming pool
drowning's and submersions can occur is a
special concern: by the time a child’s
absence is noted, the child may have
drowned. Anyone who has cared for a
toddler knows how fast young children
can move. Toddlers are inquisitive and
impulsive and lack a realistic sense of
danger. These behaviors, coupled with a
child’s ability to move quickly and unpredictably
make swimming pools particularly
hazardous for households with young
children.
Swimming pool drowning's of young children have another particularly insidious feature: these are silent deaths. It is unlikely that splashing or screaming will occur to alert a parent or caregiver that a child is in trouble. The best way to reduce child drowning's in residential pools was for pool owners to construct and maintain barriers that would prevent young children from gaining access to pools. However, there are no substitutes for diligent supervision.
Why the Swimming Pool Guidelines Were Developed
Young child can get over a pool barrier if the barrier is too low or if the barrier has handholds or footholds for a child to use when climbing. The guidelines recommend
that the top of a pool
barrier be at least 48 inches
above grade, measured on the
side of the barrier which faces
away from the swimming
pool. Eliminating handholds and
footholds and minimizing the
size of openings in a barrier’s
construction.
For a solid barrier no indentations or protrusions should be present, other than normal construction tolerances and masonry joints. For a barrier (fence) made up of horizontal and vertical members if the distance between the tops of the horizontal members is less than 45 inches, the horizontal members should be on the swimming pool side of the fence. The spacing of the vertical members should not exceed 1-3/4 inches. This size is based on the foot width of a young child and is intended to reduce the potential for a child to gain a foothold. If there are any decorative cutouts in the fence, the space within the cutouts should not exceed 1-3/4 inches.
The definition of pool includes spas and hot tubs. The swimming pool barrier
guidelines therefore apply to these structures as well as to conventional swimming pools.
How to Prevent a Child from Getting OVER a Pool Barrier
A successful pool barrier prevents a child from getting OVER, UNDER, or THROUGH and keeps the child from gaining access to the pool except when supervising adults are present.
The Swimming Pool Barrier Guidelines
If the distance between the tops of the horizontal members is more than 45 inches, the horizontal members can be on the side of the fence facing away from the pool. The spacing between vertical members should not exceed 4 inches. This size is based on the head breadth and chest depth of a young child and is intended to prevent a child from passing through an opening. Again, if there are any decorative cutouts in the fence, the space within the cutouts should not exceed 1-3/4 inches.
For a chain link fence
the mesh size should not
exceed 1-1/4 inches square
unless slats, fastened at the top
or bottom of the fence, are
used to reduce mesh openings
to no more than 1-3/4 inches.
For a fence made up of diagonal members (latticework) the maximum opening in the lattice should not exceed 1-3/4 inches.
Aboveground pools
should have barriers. The pool
structure itself serves as a barrier
or a barrier is mounted on
top of the pool structure.
Then, there are two possible
ways to prevent young
children from climbing up into
an aboveground pool. The
steps or ladder can be designed
to be secured, locked or
removed to prevent access, or
the steps or ladder can be surrounded
by a barrier such as
those described above.
For any pool barrier, the
maximum clearance at
the bottom of the barrier
should not exceed 4 inches
above grade, when the measurement
is done on the side of
the barrier facing away from
the pool.
If an aboveground pool
has a barrier on the top of the
pool, the maximum vertical
clearance between the top of
the pool and the bottom of the
barrier should not exceed
4 inches.
Preventing a child from
getting through a pool
barrier can be done by
restricting the sizes of openings
in a barrier and by using
self-closing and self-latching
gates.
To prevent a young child from getting through a fence or other barrier, all openings should be small enough so that a 4-inch diameter sphere cannot pass through. This size is based on the head breadth and chest depth of a young child.
Gates
There are two kinds of
gates which might be found on
a residential property. Both
can play a part in the design of
a swimming pool barrier.
Pedestrian Gates are the gates people walk through. Swimming pool barriers should be equipped with a gate or gates which restrict access to the pool. A locking device should be included in the gate design. Gates should open out from the pool and should be self closing and self-latching. If a gate is properly designed, even if the gate is not completely latched, a young child pushing on the gate in order to enter the pool area will at least close the gate and may actually engage the latch. When the release mechanism of the self-latching device is less than 54 inches from the bottom of the gate, the release mechanism for the gate should be at least 3 inches below the top of the gate on the side facing the pool. Placing the release mechanism at this height prevents a young child from reaching over the top of a gate and releasing the latch. Also, the gate and barrier should have no opening greater than 1/2 inch within 18 inches of the latch release mechanism. This prevents a young child from reaching through the gate and releasing the latch.
Other gates should be
equipped with self-latching
devices. The self-latching
devices should be installed as
described for pedestrian gates.
How to Prevent
a Child from
Getting UNDER / THROUGH
a Pool Barrier
In many homes, doors
open directly onto the pool
area or onto a patio which
leads to the pool.
In such cases, the wall of
the house is an important part
of the pool barrier, and passage
through any doors in the
house wall should be controlled
by security measures. The importance of controlling
a young child’s movement
from house to pool is demonstrated
by the statistics
obtained during CPSC’s study
of pool incidents in California,
Arizona and Florida. Almost
half (46 percent) of the children
who became victims of
pool accidents were last seen
in the house just before they were found in the pool.
All doors which give access to a swimming pool should be equipped with an audible alarm which sounds when the door and/or screen are opened. The alarm should sound for 30 seconds or more within 7 seconds after the door is opened and should be loud, at least 85 decibels, when measured 10 feet away from the alarm mechanism. The alarm sound should be distinct from other sounds in the house, such as the telephone, doorbell and smoke alarm. The alarm should have an automatic reset feature. Because adults will want to pass through house doors in the pool barrier without setting off the alarm, the alarm should have a switch that allows adults to temporarily deactivate the alarm for up to 15 seconds. The deactivation switch could be a touch pad (keypad) or a manual switch, and should be located at least 54 inches above the threshold of the door covered by the alarm. This height was selected based on the reaching ability of young children.
Power safety covers can
be installed on pools to serve
as security barriers. Power
safety covers should conform
to the specifications in ASTM F 1346-91. This standard specifies
safety performance
requirements for pool covers
to protect young children from
drowning.
Self-closing doors with
self-latching devices could
also be used to safeguard
doors which give ready access
to a swimming pool.
Indoor Pools
When a pool is located completely within a house, the walls that surround the pool should be equipped to serve as pool safety barriers. Measures recommended above where a house wall serves as part of a safety barrier also apply for all the walls surrounding an indoor pool.
Guidelines
An outdoor swimming pool, including an inground, aboveground, or onground pool, hot tub, or spa, should be provided with a barrier which complies with the following:
1. The top of the barrier should be at least
48 inches above grade measured on the
side of the barrier which faces away from
the swimming pool. The maximum vertical
clearance between grade and the bottom
of the barrier should be 4 inches
measured on the side of the barrier which
faces away from the swimming pool.
Where the top of the pool structure is
above grade, such as an aboveground
pool, the barrier may be at ground level,
such as the pool structure, or mounted on
top of the pool structure. Where the barrier
is mounted on top of the pool structure,
the maximum vertical clearance between
the top of the pool structure and the bottom
of the barrier should be 4 inches.
2. Openings in the barrier should not allow passage of a 4-inch diameter sphere.
3. Solid barriers, which do not have openings,
such as a masonry or stone wall,
should not contain indentations or protrusions
except for normal construction tolerances
and tooled masonry joints.
4. Where the barrier is composed of horizontal and vertical members and the distance between the tops of the horizontal members is less than 45 inches, the horizontal
members should be located on the
swimming pool side of the fence. Spacing
between vertical members should not
exceed 1-3/4 inches in width. Where there
are decorative cutouts, spacing within the
cutouts should not exceed 1-3/4 inches in width.
5. Where the barrier is composed of horizontal
and vertical members and the distance
between the tops of the horizontal
members is 45 inches or more, spacing
between vertical members should not
exceed 4 inches. Where there are decorative
cutouts, spacing within the cutouts
should not exceed 1-3/4 inches in width.
6. Maximum mesh size for chain link fences should not exceed 1-3/4 inch square unless the fence is provided with slats fastened at the top or the bottom which reduce the openings to no more than 1-3/4 inches.
7. Where the barrier is composed of diagonal
members, such as a lattice fence, the
maximum opening formed by the diagonal
members should be no more than 1-3/4
inches.
8. Access gates to the pool should be equipped to accommodate a locking device. Pedestrian access gates should open outward, away from the pool, and should be self-closing and have a self latching device. Gates other than pedestrian access gates should have a self-latching device. Where the release mechanism of the self-latching device is located less than 54 inches from the bottom of the gate.
- The release mechanism should be located on the pool side of the gate at least 3 inches below the top of the gate.
- The gate and barrier should have
no opening greater than 1/2 inch within
18 inches of the release mechanism.
9. Where a wall of a dwelling serves as
part of the barrier, one of the following
should apply:
- All doors with direct access to the pool through that wall should be equipped with an alarm which produces an audible warning when the door and its screen, if present, are opened. The alarm should sound continuously for a minimum of 30 seconds within 7 seconds after the door is opened. The alarm should have a minimum sound pressure rating of 85 dBA at 10 feet and the sound of the alarm should be distinctive from other household sounds, such as smoke alarms, telephones, and door bells. The alarm should automatically reset under all conditions. The alarm should be equipped with manual means, such as touchpads or switches, to temporarily deactivate the alarm for a single opening of the door from either direction. Such deactivation should last for no more than 15 seconds. The deactivation touch pads or switches should be located at least 54 inches above the threshold of the door.
- The pool should be equipped with a
power safety cover which complies with
ASTM F1346-91 listed below.
- Other means of protection, such as
self-closing doors with self-latching
devices, are acceptable so long as the
degree of protection afforded is not less
than the protection afforded by the above.
10. Where an aboveground pool structure
is used as a barrier or where the barrier is
mounted on top of the pool structure, and
the means of access is a ladder or steps,
then:
- The ladder to the pool or steps should be capable of being secured, locked or removed to prevent access.
- The ladder or steps should be surrounded by a barrier. When the ladder or steps are secured, locked, or removed, any opening created should not allow the passage of a 4-inch diameter sphere.
These guidelines are intended to provide a means of protection
against potential drowning's and narrowing
to children under 5 years of
age by restricting access to residential
swimming pools, spas, and hot tubs.
Exemptions
A portable spa with a safety cover
which complies with ASTM F1346-91
listed below should be exempt from the
guidelines presented in this document. Swimming pools, hot tubs, and non portable
spas with safety covers should
not be exempt from the provisions of this
document.
|